Road Street Light Load Voltage Stabilization and Energy Saving Device JMW5-DC-50KVA

The highway street lamp lighting load voltage stabilization energy-saving device JMW5-DC-50KVA is made of all-solid-state power electronic components. Its different protection levels allow it to adapt to outdoor, indoor, and varying degrees of usage. It can also improve the power factor of lighting electricity consumption and balance three-phase voltage output and operating voltage. The intelligent lighting energy saver is an electrical efficiency product introduced for road lighting. This product uses advanced harmonic-free voltage regulation technology and employs microcomputer-controlled power output devices to manage the operation of gas discharge lamps, thereby achieving the goal of improving electrical energy usage efficiency.　　 A brief discussion on relay protection methods for power voltage regulation and stabilization devices: The development of voltage stabilization enterprises needs to follow a sustainable path. Based on the working state of the tube, electrical energy devices are often divided into two categories: linear electrical energy devices and switching electrical energy devices. Additionally, there is a small power supply that uses voltage stabilizing tubes. The switching street lamp renovation lighting voltage regulator uses an output stage that repeatedly switches between "on" and "off" states, working together with energy storage components (capacitors and inductors) to generate an output voltage.

Highway street lamp lighting load voltage stabilization energy-saving device JMW5-DC-50KVA technical parameters and specifications:

The intelligent street lamp voltage reduction energy saver adopts 3D CAD design, functioning both as a switch box and an energy saver. The automatic control box display for the street lamp circuit uses a Chinese interface. It features comprehensive protection functions such as overcurrent, overvoltage, undervoltage, overheating, and short-circuit faults, with automatic bypass operation. Lighting: The series of intelligent energy-saving lighting controllers use dimming module control panels to replace conventional flat switches for controlling lamps, enabling overall control of illuminance values and uniformity of illumination in various rooms.

Phase adjustment: Three-phase regulation, independent of each other, and does not require three-phase loads to be balanced. It has comprehensive protection functions: such as overcurrent protection, overheating protection, and circuit fault protection. Simple installation: No need to modify the user's existing lighting wiring; it can be directly connected after the electricity meter on the street lamp switch line and before the lamp wire switch.

Energy-saving regulation and voltage stabilization: In the same lighting system, different types of lamps can be mixed. For each phase, independent input voltage and energy-saving control can be performed, with strong operability, and it can withstand three-phase unbalanced loads. Remote control interface. Equipped with computer and remote automation control RS-485 or RS-232 interfaces; can be used for remote control upgrades and on-site computer program modifications.

The intelligent energy-saving street lamp lighting has a low-voltage automatic bypass function, automatically entering energy-saving mode when voltage returns to normal. Can be equipped with a time controller or timer for intelligent control (optional). Particularly suitable for various types of lamps such as metal halide lamps, high-pressure sodium lamps, energy-saving lamps, incandescent lamps, and fluorescent lamps; more effective for lighting equipment operating continuously at night. Suitable for mixed lighting where inductive loads dominate and the supply voltage is consistently higher than the rated voltage.

The highway street lamp lighting load voltage stabilization energy-saving device JMW5-DC-50KVA is very simple to install. It is connected in series between the main lighting starter and the power wiring. Three-phase regulation: Each phase can be adjusted independently, allowing for unbalanced loads, and ensuring that a fault in one phase does not affect the normal operation of the other two phases. The same device can handle different types of lamp loads and can also regulate the input voltage for each phase.

Highway street lamp lighting load voltage stabilization energy-saving device JMW5-DC-50KVA setup and operation instructions:

Ensure the lamp control to be set is in a powered-off state. Press and hold the key, then power on the lamp control (Power light turns on). Wait for the light to flash, then release the key.

Press keys 1-8 to set the lighting. When the corresponding LED light on the lamp control panel lights up, it indicates that the corresponding channel is set to the on state. If the LED light is off, it indicates that the corresponding channel is in the off state.

After completing the settings, press the key again. The machine will automatically save the current settings and restart (relay will click).

For example: If channels 1, 2, and 3 need to be turned on, set LED indicators 1, 2, and 3 to light up, then press the key to save.